Oki MPS930b User Manual

Also see for MPS930b: Handy reference Material safety data sheet

Contents

MPS930b User’s Guide> 137> CAUTION: Never touch areas labelled as “HighVoltage.” You can get an electric shock. Never touch alabelled area found on or near the heat roller. You canget burned. If a sheet of paper is wrapped around theheat roller, do not try to remove it by yourself to avoidinjuries or burns. Switch off the machine immediately,and contact your service provider.• Remove any remaining pieces of paper.• Remove any dust or stains with a dry clean cloth.WHEN NOT IN USE FOR A LONG TIMECarry out the following procedure if you are not going to use theprinter for a long period of time.1. Press the power switch to the <{> position to turn thepower off.2. Remove all connection cords, such as the power cord andinterface cables. See “Rear View” on page 42 for connectordiagrams.3. Remove the paper from the paper trays and store it in alocation free of humidity and dust.NOTE> for details on storing the paperMOVING THE PRINTERCarry out the following procedure when moving the printer.CAUTION> When lifting the machine, get a firm footing and bendyour knees to avoid possible injuries to your backNOTE> The weight of this printer, without the optionalaccessories, paper tray, consumables and paper, is 41.0kg or 90 lbs. If the optional duplex module or tray modulehas been installed, uninstall it before moving the printer.Otherwise, they may fall to the ground and cause injuries.Refer to “Installing Accessories” on page 170 for detailson uninstalling the optional accessories.> When lifting the printer, there should be 2 persons, one infront and one behind the printer, to firmly grip the