Oki OKIFAX 5400 User Manual

Also see for OKIFAX 5400: Service guide Handbook Quick reference Garantie, réglementation et spécifications Référence rapide

Contents

Oki OKIFAX 5400 User Manual Manual pdf 45 page image

Dial Directories37EnglishOne touch parametersIf you are experiencing problems communicating with a remote locationin a very noisy telephone area, set up a One Touch key for that location andtry turning Echo Protection on for that One Touch key.1. Press the Select Function key.2. Press the 9/User Program One Touch key. The display shows1:FUNC. PROGRAMMING.3. Press the YES key. The display shows FUNCTION NO. [ ].4. Using the numeric keypad, enter 23. The display shows 23:ONETOUCH PARAM.5. Press the One Touch key for the location whose settings you want tochange. The display shows ECHO PROTECTION, [OFF].6. Press the NO key to switch Echo Protection on.7. Press the YES key to confirm your selection.8. Press the Select Function key to finish.Note:Should you later change the location the One Touchkey is used for, then remember to switch EchoProtection off.Chain diallingEach fax number that you enter or program into your fax machine can beup to 32 digits long. In the case that you need to dial a number which islonger than 32 digits, then you can use the chain dial feature.To create a chain dial number, program the first 31 digits of the numberinto a One Touch key or Auto Dial number. Then press the Plus One Touchkey to make this is a chain dial number. Next, program the rest of thenumber into another One Touch key or Auto Dial number. You can, if sodesired, leave teh second part of the number unprogrammed and enter itmanually on the numeric keypad.To use a chain dial number, select the One Touch key or Auto Dial numberprogrammed with the first part of the chain dial number. The display willshow PRESS OT/AD/SRCH KEY. Then select the One Touch key or AutoDial number programmed with the second part of the chain dial number.If the second part of the chain dial number was not programmed, enter it