Oki OKIFAX 5400 User Manual

Also see for OKIFAX 5400: Service guide Handbook Quick reference Garantie, réglementation et spécifications Référence rapide

Contents

Oki OKIFAX 5400 User Manual Manual pdf 79 page image

Programming71Englishnumber you use in your PBX to get an outside line. After it dials your dialprefix number, your fax machine pauses to wait for an outside line beforedialling the rest of the telephone number. Available settings are on and off.See Connecting to a PBX in Installation for instructions on changing thissetting.FLASH/EARTH/NORMAL: If your fax machine is connected to a PBX,this function tells your fax machine about the type of PBX line your faxmachine if connected to. Available settings are normal (N), flash (F) andearth (E).AUTO START: When this function is turned on, your fax machine willautomatically begin dialling as soon as you have selected a location bypressing a One Touch key or entering an Auto Dial code. You do not haveto press the Start key. Available settings are on and off.DIAL PREFIX: If your fax machine is connected to a PBX, use thisfunction to tell your fax machine what access number is used to obtain anoutside line from your PBX. You can enter up to 4 digits. See Connectingto a PBX in Installation for instructions on changing this setting.IT2 DETECT: This is another type of dial tone detection (France only).Available settings are on and off.Changing dial parameter settings1. Press the Select Function key.2. Press the 9/User Program One Touch key. The display shows:1:FUNC. PROGRAMMING.3. On the numeric keypad, press 2. The display shows 2:DIALPARAMETER.4. Press the YES key until the display shows the dial parameter youwant to change.5. Repeatedly press the NO key until the setting you want appears inthe display.6. Press the YES key to confirm your selection. The name of the nextdial parameter setting will appear in the display.7. Press the Select Function key to finish.