Dial Directories39English8. Press the Start key to finish programming the One Touch key. Thedisplay shows AUTO DIAL NO. [ ].9. To continue programming Auto Dial numbers, go back to Step 3. Ifyou are finished programming, press the Select Function key.Note:If you want to delete any programming for a AutoDial key, follow Steps 1 - 4. At Step 5, press the Spacekey until the number is deleted, then continue withSteps 8 - 9.GroupsProgrammingOnce you have programmed some One Touch keys or Auto Dial numbers,you can then program these numbers into groups to allow you to send thesame fax to multiple locations.1. Press the Select Function key, then press the 8/Location ProgramOne Touch key. The display shows LOCATION PROGRAMMING.2. On the numeric keypad, press the # key. The display shows GROUPSETTING.3. Using the numeric keypad, enter the group number (01 - 20) youwant to program.4. The display shows the number of your current group and SELECTLOC.(S). You can now add a location to your group (or delete alocation from it). Refer to the instructions below.Enter a unique character. Press the 0/Unique key repeatedly until the characteryou want appears. The following characters areavailable: ! # & ‘ ( ) * + , - . / : ; = ? _ ä ¤ ñ ö ü Æ Å Øæ å ø.Enter next character Press the NO key to move the cursor to the nextposition for the next character.Move the cursor to make corrections YES and NO keys.To Do This UseAdd a One Touch location Press the One Touch key. Press YES to add it to thegroup.To Do This Use
