Conducting network HotSync operations2975. Click Conduit Settings.6. For each application, click the direction in which you want to write data, or clickDo Nothing to skip data transfer for an application.Changing the HotSync setting from the default affects only the next HotSyncoperation. Thereafter, the HotSync Actions revert to their default settings. Touse a new setting on an ongoing basis, click Make Default. Thereafter, whateveryou selected as the default setting is used for HotSync operations.7. Click OK.8. Close the Conduit Settings window.Conducting network HotSync operationsWhen you use the network HotSync technology, you can take advantage of theLAN and WAN connectivity available in many office environments. NetworkHotSync technology enables you to perform a network HotSync operation usingany one of the following methods: 802.11b radio Using a cradle/cable that is connected to any computer on your LAN or WAN(provided that the computer connected to the cradle/cable also has the networkHotSync technology installed, your computer is on, and the HotSync Manageris running).
