– 20 –Controls and Their FunctionsMenu Operation Section√ Setup card insertion slotThe optional setup cards are inserted into this slot.ƒ MENU SET/OFF switchThis displays the setting menu on the viewfinder screen through VIDEO OUT connector.SET: The page on which the previous setting menu operations were completed appears onthe viewfinder screen. (When the menu is used for the first time, the first of the pageswhich can be displayed appears.)OFF: The setting menu is not displayed on the viewfinder screen through VIDEO OUT con-nector.≈ SHIFT/ITEM buttonEach time this button is pressed, the cursor moves on the setting menu page now displayed.Use it when selecting items.|Note{This switch functions differently depending on the operation item. Check the function by oper-ating the menu item by item.∆ UP buttonThis is used to increment the setting of the item selected on the setting menu by 1 level eachtime it is pressed or to switch the setting between ON and OFF.« DOWN buttonThis is used to decrement the setting of the item selected on the setting menu by 1 level eachtime it is pressed or to switch the setting between ON and OFF.» PAGE buttonThis is used to select the setting menu page.Time Code-Related Section (1)… GENLOCK IN/(VIDEO IN) connector (BNC)The reference signal is supplied to this connector when the camera section is to be subject togenlock operation or when the time code is to be locked externally. Also, the signal input to thisjack can be displayed in the viewfinder as the return video signal. Refer to “RET Button” onpage 106 for details.»√ ≈ ƒÃÕ( )∆ ( )« ( )– œ œŒ
