– 60 –I N D I C A T O R {E X T E N D E R ::::::::::O NO NO NO NO NO NO NO NS H U T T E RT A P EB A T T E R YF I L T E RWH I T EG A I NL E V E L M E T E R C H 1I R I S S I R I SC A M E R A I DV F¢|μStatus Displays Inside the Viewfinder ScreenSelecting Display ItemsThe items which are to be displayed on the viewfinder screen can be selected by setting ON orOFF for each item on the VF INDICATOR page. The items which can be selected are as follows.¡Extender display¡Shutter speed/mode display¡Remaining tape length display¡Remaining battery level display¡Filter display¡White balance memory display¡Gain value display¡Level meter display¡Iris value/super iris ON status display¡Camera ID display¡The camera ID is displayed when recording the color bar according to the OUTPUT/AUTOKNEE switch setting. See “Setting the Camera ID” (page 63) for a detailed description.Select the items to be displayed on the viewfinder screen.1 Set the MENU SET/OFF switch to the SET position while the SHIFT/ITEM button and UPbutton are held down together.2 Press the PAGE button to display the MAIN menu screen 2 of 4.3 Press the SHIFT/ITEM button to move the cursor to the “VF INDICATOR” position.4 Press the UP or DOWN button to open the VF INDICATOR page.5 Press the SHIFT/ITEM button to move the cursor to the position of the disired item.6 Press the UP and DOWN buttons to choose whether to display (ON) or not display (OFF) theselected item on the viewfinder screen.The setting switches to ON or OFF each time the UP (or DOWN) button is pressed.Repeat steps 5 and 6 when setting display ON/OFF for other items.7 When menu operations have been completed, set the MENU SET/OFF switch to OFF.The setting menu disappears from the viewfinder screen and the displays indicating the set-tings of the selected items appear.Extender displayShutter speed/mode displayRemaining tape length displayRemaining battery level displayFilter displayWhite balance memory displayGain value displayLevel meter displayIris value/super iris ON status displayCamera ID display