– 23 –Power SupplyPower can be supplied to the unit using a battery pack or AC power supply.Using a battery packA battery pack which is made by any of the four following manufacturers can be used:A Panasonic, B Anton Bauer, C Sony or D IDX.Before using a battery pack, be sure to charge it completely using a battery charger.¡See the Handling Instructions for the battery pack and battery charger for a detailed explanationof charging methods.Using an Anton Bauer Battery Pack1 Mount the battery pack.Insert the battery pack in the direction of the arrow and then slide it into place.2 When detaching the battery, hold down the detachment lever of the battery holder and slidethe battery pack in the direction of the arrow.|Note{The AJ-D610WA supports the intelligent battery system and the ultra-light system.Automatic detection can be performed for intelligent batteries with a remaining battery level of10% or more. At this time, the remaining battery level is displayed numerically (percentagedisplay) inside the viewfinder. If the power is turned on with a remaining battery level of 10%or less, the voltage is displayed. When external power is supplied after intelligent batterysensing, the remaining battery charge display switches to the externally supplied voltagedisplay.Power Supply Output ConnectorControl SwitchLeverPack
