Panasonic AJ-D610WA Operating Instructions Manual

Contents

– 71 –Adjusting the White Balance/Black Balance3 Place the white pattern over a location with the same conditions as the light source illuminat-ing the subject and zoom up to project white on the screen.A white object (white cloth, white wall) near the subject can also be used. The white arearequired is as shown below.4 Adjust the iris of the lens.5 Press the AUTO W/B BAL switch to the WHT side and release the switch.The switch returns to the center and the white balance is automatically adjusted.6 During the adjustment, the following message appears on the viewfinder screen.(However, the message appears only when the display mode is set to “2” or “3”.)7 The adjustment is completed in several seconds (and a message such as the one shown inthe figure appears).The adjustment value is automatically stored in the memory (A or B) which was selected instep 1.1/4 or more of the screen height|Note{Take care not to allow high-intensity spots toenter the screen.1/4 or more of the screen widthWhite clothAUTO W/B BAL switchMessage during adjustmentMessage after adjustment is completedA W B A C T I V EA W B A O K 3 . 2 K