– 57 –Status Displays Inside the Viewfinder ScreenIn addition to images, messages indicating the unit’s settings and operating status appear on theviewfinder screen. The center marker and safety zone marker, etc. are also displayed.When the MENU SET/OFF switch is set to OFF, items set to SET at the VF DISPLAY page of thesetting menu and using related switches appear at the top and bottom of the screen.Messages informing of the setting contents or of the adjustment course or results can also bedisplayed for approximately 3 seconds when settings are changed, during the course of adjust-ments, or after adjustments have been completed.¡See “Selecting Display Items” (page 60) for selecting display items, “Display Mode and SettingChange Message” (page 61) for the setting change message, and “Setting the Marker Displays”(page 62) for the marker displays.The display positions of all items which can be displayed are shown in the figure below.e Extender displayf Shutter speed/mode displayg Remaining tape length displayh Remaining battery level displayi Filter displayj White balance memory displayk Gain value displayl Audio level displaym Iris value displayn Warning displayo Safety zone markerp Center markerq Super iris ON or super black ON displayr MARK1/MARK2/TAKE displays TCG (Time Code Generator) displayt Master gain & super gain setting displayu Battery setting displayEX21 A 0dB F5.6T_M1- - - - - - -1/250 30-25 14.6V1 2 q 3 s 4ooouonrp5 6 7 8 9St NiCd12|Note{When in SUPER V mode, “SUP.V” is displayed at shutter speed position f in the Viewfinderscreen.
