– 97 –RecordingShooting images1-1 Select the filter in accordance with the lighting conditions, and when the white balancehas already been stored in the memory, set the WHITE BAL switch to “A” or “B”.When the white balance and black balance have not been stored in the memoryand there is no time to adjust the white balance:Set the WHITE BAL switch to PRST and the FILTER knob to “1”.A 3200K white balance is now achieved.1-2 To adjust the white balance on site, select the filter which corresponds with the lightingconditions, set the WHITE BAL switch to “A” or “B”, and adjust the white balance byfollowing the steps below.(1) Press the AUTO W/B BAL switch to the AWB side to adjust the white balance.(2) Press the AUTO W/B BAL switch to the ABB side to adjust the black balance.(3) Press the AUTO W/B BAL switch to the AWB side to adjust the white balance.For details on how to adjust the white balance, read through the section entitled“Adjusting the white balance/black balance” (page 70).2 Aim the camera at the subject and adjust the focus and zoom.3 When using the electronic shutter, set the shutter speed and operation mode.¡See “Setting the Electronic Shutter” (page 77) for a detailed description.4 Press the VTR START button of the unit or the VTR button of the lens to start recording. TheREC lamp inside the viewfinder lights during recording.5 Press the VTR START button again to stop recording. The REC lamp inside the viewfindergoes off.Tape operation buttonsThe tape operation buttons (EJECT, REW, FF, PLAY/PAUSE and STOP) do not function duringrecording.2 1-2 1-1,1-24,53
