– 54 –¢| R O P {M A† S T E RM A S T E RM A S T E RP E Dμ 0 0.0 4 5μ 0 0 0μ 0 0 0μ 0 0 0μ 0 0 0μ 0 0 0μ:::::::: 0 0 0D T LG A MM AR G A I NG A I NBR P E D E S T A LP E D E S T A LP E D E S T A LGBDisplaying Menus on the Viewfinder ScreenOperations on SUB menusSelecting the desired item1 Press the SHIFT/ITEM button.Each time this button is pressed, the cursor (arrow) which indicates the selected item movesto the next item.The item can also be selected using the UP and DOWN buttons as follows.Changing the settingsPress the UP button to increase the setting.¡The setting is incremented by 1 level each timethe UP button is pressed.Press the DOWN button to decrease the setting.¡The setting is decremented by 1 level each timethe DOWN button is pressed.Changing the ON/OFF selectionThe setting switches to ON or OFF each time the UP (or DOWN) button is pressed.Returning to the default settingsAlign the arrow with READ FACTORY DATA on the “INITIALIZE” SUB menu page of the MAINmenu screen 4 of 4.When the UP (or DOWN) button is now pressed, the initial (factory) settings will be restored.However, care should be taken as the camera ID, GENLOCK, CARD R/W SELECT and TIME/DATE cannot be returned to the default settings.Quitting the menuSet the MENU SET/OFF switch to OFF.¡The setting menu disappears from the viewfinder screen and the displays indicating the unit’scurrent status appear at the top and bottom of the viewfinder screen.CursorMovement orderSHIFT/ITEM PAGEUPDOWN MENUCH 1 CH 2TCGSETOFFF-RUNSETR-RUNMICMICAUDIO INLINEONOFFFRONTREARCUECH 1MIXCH 2REAR MIC POWERREAR MIC POWER
