Panasonic BT-LH910G Operating Instructions Manual

Also see for BT-LH910G: Brochure Brochure Brochure & specs Operating instructions

27Main Menu (continued)Sub menu Settings DescriptionGPI MARKER1 *5 4:313:914:9CNSCO 2.39CNSCO 2.352:1VISTA95% (16:9)93% (16:9)90% (16:9)88% (16:9)80% (16:9)USER(16:9)95% (4:3)93% (4:3)90% (4:3)88% (4:3)80% (4:3)USER(4:3)GPI MARKER1 : Selects the marker displayed by the GPIterminal “MARKER1 ON/OFF” (page 62)operation.GPI MARKER2 : Selects the marker displayed by the GPIterminal “MARKER2 ON/OFF” (page 62)operation.<4:3> 4:3 marker<13:9> 13:9 marker<14:9> 14:9 marker 2.39:1 marker 2.35:1 marker<2:1> 2:1 marker VISTA marker<95% (16:9) > 95% area marker for 16:9 aspect ratio<93% (16:9) > 93% area marker for 16:9 aspect ratio<90% (16:9) > 90% area marker for 16:9 aspect ratio<88% (16:9) > 88% area marker for 16:9 aspect ratio<80% (16:9) > 80% area marker for 16:9 aspect ratio User settings area marker for 16:9 aspect ratio<95% (4:3) > 95% area marker for 4:3 aspect ratio<93% (4:3) > 93% area marker for 4:3 aspect ratio<90% (4:3) > 90% area marker for 4:3 aspect ratio<88% (4:3) > 88% area marker for 4:3 aspect ratio<80% (4:3) > 80% area marker for 4:3 aspect ratio User settings area marker for 4:3 aspect ratioGPI MARKER2 *5MARKER TYPE *6 TYPE1TYPE2Selects conventional monitor or camera recorder marker size. Conventional monitor marker size Marker size compliant with the camera recorder(Panasonic made)CROSS HATCH HIGHLOWOFFTurns the cross hatch grid on and off and sets its density. Displays a bright cross hatch grid Displays a dim cross hatch grid Turns the display offSIZE 8040Selects the cross hatch grid size.<80> 80 dots and 80 lines<40> 40 dots and 40 linesRemote control via RS-232C ends in error (error response: ER001) when “GPI MARKER1” or “GPI*5MARKER2”is selected with the GPI function.Display size for SD signals differ.*6TYPE1: The effective horizontal area meets the SMPTE125M for NTSC and ITU-R BT. 601-5 for PAL.TYPE2: The effective horizontal area meets the EIA-RS170A for NTSC and ITU-R BT. 470-4 for PAL.The marker is not displayed during 2-screen display (SUB WINDOW), PIXEL TO PIXEL mode, and 3D•assist mode.The marker is not displayed during VF line operation.•