Panasonic BT-LH910G Operating Instructions Manual

Also see for BT-LH910G: Brochure Brochure Brochure & specs Operating instructions

62When a 16:9 marker and a 4:3 marker are simultaneously selected and activated on a 16:9 aspect ratio*1display, both markers are displayed.When a 16:9 marker and a 4:3 marker are simultaneously displayed, the background of the marker*2selected by the 16:9 marker is controlled.REMOTE SpecificationsThis monitor permits remote operation via GPI/SERIAL terminal.GPI terminalGPI screen items correspond to the following terminals. Use the GPI menu to assign functions to eachterminal (page 47).Functions assigned to terminals are executed when GND (pin 5) is short-circuited (ON) or open (OFF).Operating conditions■Level operation: Operates when GND is short-circuited.Edge operation: Operates when GND changesfrom open to short-circuited.When level operation is assigned to more than•one terminal, the function operates as long asone of the terminals is short-circuited.Hold the edge operation for at least 0.2•seconds after the change.GPI Terminal (9P)Pin number Signal1 GPI12 GPI23 GPI34 GPI45 GND6 GPI57 GPI68 GPI79 GPI8Assigned item Function Operating conditionsUNDEF Undefined (no function assigned) —MARKER1ON/OFF *1Switches marker display defined in “GPIMARKER1” (page 27) in the “MARKER”menu.Level operation(Short-circuited: ON, Open: OFF)MARKER2ON/OFF *1Switches marker display defined in “GPIMARKER2” (page 27) in the “MARKER”menu.Level operation(Short-circuited: ON, Open: OFF)MARKER BACKHALF *2Reduces the brightness of the backgroundoutside the marker displayed in “GPIMARKER1” (page 27) to 50 %.Level operation(Short-circuited: ON, Open: OFF)MARKER BACKBLACK *2Reduces the brightness of the backgroundoutside the marker displayed in “GPIMARKER1” (page 27) to 0 %.Level operation(Short-circuited: ON, Open: OFF)CENTER MARKER Turns the center marker display on andoff. (When other markers are displayed,this marker is superimposed on othermarkers.)Level operation(Short-circuited: ON, Open: OFF)SD ASPECT Sets the aspect ratio for SD signal input.(Disabled during HD signal input)Level operation (Short-circuited:16:9, open: 4:3)SCAN Switches the scan mode between“UNDER” and “NORMAL”.Level operation (Short-circuited:UNDER, Open: NORMAL)GAMMA SEL. FILM Switches the gamma curve to FILM mode. Level operation (Short-circuited: FILMmode, Open: STANDARD mode)(Continued on next page)