|
553D Assist Mode (continued)CONVERGENCE (Convergence Check)This function is for checking the subject’s position at a fixed screen position in order to determine the depthposition of the main subject.Automatically or manually switch the SDI1 (L) image and SDI2 (R) image and then check the subject’s position.FUNC.MODEMANU L SLOWMANUAL SPEEDCONVScreen:Normal display of one screenThe place at which the image does not change is•the convergence point.If the camera adjustment (vertical or rotation•direction position adjustment) is correct, the imageat other than the convergence point will shift tothe left/right target.The underlined values are factory preset setting values.Sub menu Operation Settings DescriptionMODE Knob1 (turn) MANUAUTOSelects the switching method of the L side image and Rside image. Manual switching Automatic switchingMANUAL Knob2 (turn) LRSelects the image to display when the MODE menu isMANU. Image of L side Image of R sideSPEED Knob3 (turn) SLOWFASTSelects the speed for when the MODE menu is autoswitching. Every 1 second Every 4 frames (When 720P: Every 8 frames)COLOR (Color Check)This function overlays and displays the SDI1 (L) image and SDI2 (R) image on a checkerboard pattern inone screen to enable you to check the brightness offset and color differencesFUNC.SIZE128--COLRScreen:Overlay L/R on one screen.If it is easy to see the borderline of the checkerboardpattern, the brightness or color of L/R images isoffset.The underlined values are factory preset setting values.Sub menu Operation Settings DescriptionSIZE Knob1 (turn) 128256Selects the checkerboard grid size for when overlaying theimage of the L side and image of the R side.<128> The checkerboard grid consists of squares of 128samples and 128 lines.<256> The checkerboard grid consists of squares of 256samples and 256 lines. PreviousNext |