|
38Main Menu (continued)FUNCTIONThe underlined values are factory preset setting values.Sub menu Settings DescriptionFUNCTION 1 -FUNCTION 3HV DELAYBLUE ONLYGAMMA SELECTSD ASPECTSCANSUB WINDOWWFM/VECTORMARKERWHITE BALANCEPIXEL TO PIXELPIXEL POSITIONFOCUS-IN-REDZEBRAREAR TALLYLEVEL METERCROSS HATCHMONOBLACK MODETIME CODECLOSED CAPTIONUNDEF(Factory default:FUNCTION1:WFM/VECTORFUNCTION2:PIXEL TO PIXELFUNCTION3:FOCUS-IN-RED)Selects functions to be assigned to [FUNCTION1] -[FUNCTION3] (front panel buttons). *1Displays the image blanking period.The display changes in the following order.DELAY OFF → H DELAY → V DELAY → HV DELAY →DELAY OFF *1Cuts the red and green signals. Use this function to checkphase and chroma. This button toggles between ON andOFF.*2*3Displays the gamma curve.The display changes in the following order.GAMMA STANDARD → GAMMA FILM →GAMMA STDIO/PST → GAMMA STANDARD *2 *3Switches between “16:9” and “4:3.” *2*3Switches between “UNDER SCAN” and “NORMAL SCAN”. *1Sets the split-screen function.The display changes in the following order.SINGLE → FULL/PART → STILL → SINGLE *2Displays waveform or vector display.For details on the available operation items, refer to page41. *2*3*4Turns the marker on and off.For details on the available operation items, refer to page41.WHITE BALANCE GAIN/BIAS RGB direct adjustment canonly be accessed when VAR1 to VAR3 are selected inCOLOR TEMP.Turns the PIXEL TO PIXEL function On and Off.Positions the display of signals in PIXEL TO PIXEL mode.(Continued on next page)The settings are cancelled when the power is turned OFF.*1If these settings are changed, the menu settings will also change.*2The control settings do not operate during GPI operation.*3Not displayed when 16:9, 4:3 and CENTER are all OFF in the MARKER menu settings.*4 PreviousNext |