|
48Main Menu (continued)INPUT SELECTThe underlined values are factory preset setting values.Sub menu Settings DescriptionVIDEO OFFONSets or cancels VIDEO line for the INPUT button.*1FORMAT AUTONTSCPALUsed to select the format for VIDEO input.*2 NTSC or PAL is selected automatically. NTSC PALNTSC SETUP 7500Selects NTSC setup level.<75> Select this function when using 7.5 % setup signals.(Adjusts the interior of the monitor to the 7.5 % setup levelto suit the black level)<00> Select this when the signal is at a 0 IRE setup level.SDI1 OFFONSets or cancels SDI1 line for the INPUT button.*1SDI2 OFFONSets or cancels SDI2 line for the INPUT button.*1HDMI OFFONSets or cancels HDMI line for the INPUT button.*1YPB PR OFFONSets or cancels YP BPR line for the INPUT button.*1COMPONENTLEVELSMPTEB75B00Selects YP BPR (component) signal input level. Signal level complies with SMPTE and PB and PR are 0.7V [p-p] at 100 % chroma. Select this when connecting a Betacam or similardevice with a setup function. (Adjusts the interior of themonitor to the 7.5 % setup level to suit the black level) Select this when connecting a Betacam or similardevice without a setup function.VF OFFONSets or cancels VF line for the INPUT button.*1VIDEO/YPB PR VIDEOYPBPRUsed to select the VF input mode. Selects the VIDEO signal.BPR > Selects the YP BPR (component) signal.SIGNAL TYPE HDSDUsed to select the signal output from the camera. Selects the HD signal. Selects the SD signal.INT SG OFFONSets or cancels INT SG line for the INPUT button.*1All of the seven input lines (VIDEO, SDI1, SDI2, HDMI, YP*1 BPR , VF, and INT SG) cannot be set to OFF. Ifsix of the input lines are set to OFF, the one remaining input line cannot be set to OFF.“AUTO” is the factory default, but select a specific format when there is risk that the input signal may be*2interrupted by outside noise. PreviousNext |