Panasonic BT-LH910G Operating Instructions Manual

Also see for BT-LH910G: Brochure Brochure Brochure & specs Operating instructions

7OutlineThis unit is a liquid crystal display monitor for broadcasting and business use that is equipped with a 23 cm(9.0 inch) (effective display area) liquid crystal display.It can be used as a VF (viewfinder) for broadcasting and business cameras made by Panasonic.High Performance Liquid Crystal Panel■This product incorporates a WXGA (1280 x 768) class high-resolution IPS liquid crystal panel. It offersexcellent color reproduction, a wide viewing angle, and a fast response time.Superb Moving Image Quality Achieved by New Image Processing Engine■The 10-bit image processing engine facilitates accurate and smooth gradation results from low to high•brightness levels.The incorporation of an I/P conversion circuit with a low delay of less than one field minimizes the delay•time between signal input and monitor display.The incorporation of diagonal line compensation circuit reduces image degradation in the vertical•direction and jagged noise on diagonal lines.The high-speed moving image response time provides vivid and clear image display.•Gamma compensation is performed for each monitor.•Includes 3D Assist Functions■Various assist functions are included to allow connecting the left and right connectors of a 3D camera tothe two SDI inputs and capturing 3D images that are easier to view on a 2D monitor. These functions alsomake camera adjustments easier and reduce the preparation time required for 3D shooting.Wide Variety of Functions and Interfaces■Equipped with 3G-SDI, SDI (HD/SD compatible), HDMI, VIDEO, and YP• BPR inputs.FOCUS-IN-RED function (Displayed abbreviated to F-IN-R in the picture adjusting knob status display.)•Making camera focus adjustments is extremely easy because the section of the image in focus isdisplayed in red to make it easy to understand what is in focus.WFM (Y/R/G/B) and vectorscope display functions•Capable of input signal Y/R/G/B waveform display (when 3G-SDI, SDI, HDMI, VIDEO, or YP BPR input)and vectorscope display.Audio level meter display function and headphones jack•The level of audio signals embedded in 3G-SDI, SDI, and HDMI signals can be displayed. Furthermore,support is also included for reference point setting, peak hold, and overrange display.The incorporation of a headphones jack means you can check the audio. The channel can also beselected in a menu.Closed caption function•The captions added to video signals can be displayed during SDI and VIDEO input.2-screen display function•The screen can be split into two to allow you to make a screen comparison for the same inputconnectors and same format.PIXEL TO PIXEL function•This function makes camera focus adjustment extremely easy because the input signals are displayedwithout being resized.When resizing is not performed, the 1080/60i signals can be expanded to the equivalent of anapproximately 13.5-inch wide monitor, and then checked.Cross hatch display function•This function displays markers at regular vertical and horizontal intervals to facilitate easy composition.