Section 700 - Operation Chapter 7. SLT Features576-50-700 DBS 576HD (USA) issued September 2001 5-17To cancel Call Forwarding - No Answer:Call Forwarding-All Calls and Do-Not-DisturbThe System allows you to cancel both Call Forwarding-All Calls and Do-Not-Disturb (DND) for yourown extension in one step.OperationTo cancel Call Forwarding-All Calls and DND:.Hardware Requirements• N/ARelated Programming• FF1-0-03: Extension COS (Call Forward All/Busy/No-Answer/DND Cancel)• FF1-0-03: Extension COS (Call Forward/All Calls)• FF1-0-03: Extension COS (Call Forward/Busy)• FF1-0-03: Extension COS (Call Forward/No Answer)• FF1-0-03: Extension COS (Call Forward/Other)• FF1-2: Dial Plan• FF1-0-03: NPDN and PNPDN Call Forwarding Programming AddressConsiderations• Calls cannot be forwarded to an extension that already has Call Forwarding or DND activated.(For example, extension 220 can only forward to extension 225 if 225 is not forwarded.• If forwarding to an outside number, the destination number must be pre-programmed into aSystem Speed Dial (SSD) code.• Call Forwarding - Busy and Call Forwarding - No Answer can both be set at the same time.Action Result1. Lift the handset or press the ON/OFF key. Intercom dial tone2. Enter the appropriate Cancel Call Forwarding code:• For your extension, enter 733.• For another extension, enter 753.3. If canceling Call Forwarding for another extension, dial theextension number.4. Replace the handset or press the ON/OFF key.Action Result1. Lift the handset or press the ON/OFF key. Intercom dial tone2. Enter the CF-All/DND Clear code (default = 7**).3. Replace the handset or press the ON/OFF key.