Section 700 - Operation Chapter 7. SLT Features576-50-700 DBS 576HD (USA) issued September 2001 5-77Speed DialingDescriptionThe System supports the following speed dial features:• Personal Speed Dial (PSD)• System Speed Dial (SSD)• Speed Dial Linking• Speed Dial Name AssignmentPersonal Speed DialYou can store frequently called numbers using the PSD feature. Up to 20 PSD numbers can be storedin PSD bins numbered 80-99.You can assign up to 10 PSD numbers to the one-touch keys on a non-display or small-display phone,and up to 20 PSD numbers to the soft keys on a large-display phone. Once the PSD numbers havebeen assigned, you dial them by pressing the appropriate key. (For additional information, see “One-Touch Keys” on page 5-67.)You can also enter a name up to 7 characters for each of the PSD numbers. This allows PSD numbersto be confirmed by name rather than by number.OperationTo assign PSD numbers:To dial a PSD number by entering the speed dial bin number:Action Result1. Lift the handset or press the ON/OFF key. Intercom dial tone2. (A) Press the PROG key.(B) Press the AUTO key.OR...(A) Enter the Speed Dial Set/Clear code (default = 710).3. Enter the PSD bin number (80-99). Enter Spd Dial displays4. Dial the phone number.5. Press the HOLD key. Stored Spd Dial displays6. Replace the handset or press the ON/OFF key.Action Result1. Lift the handset or press the ON/OFF key. Intercom dial tone2. If necessary, access an outside line. Outside dial tone
