Section 700 - Operation Chapter 7. SLT Features576-50-700 DBS 576HD (USA) issued September 2001 5-25Hardware Requirements• N/ARelated Programming• FF1-0-02: Intercom Voice Call Pickup• FF1-2: Dial Plan• FF5-6: Call Pickup Group AssignmentConsiderations• Extension Group Pickup - 12 /system; maximum 20/group• The Call Pickup Group assignments determine the order calls are picked up (i.e. if two calls areringing in the call pickup group, the call ringing the first member will be picked up first).Extension Direct PickupExtension Direct Pickup allows you to answer a call to another extension by dialing the number of theringing extension.OperationTo use Extension Direct Pickup:Hardware Requirements• N/ARelated Programming• FF1-0-02: Intercom Voice Call Pickup• FF1-2: Dial PlanConsiderations• N/ATrunk Group PickupTrunk Group Pickup allows you to answer calls ringing to any extension within your own MCOincoming trunk group.Action Result1. Lift the handset or press the ON/OFF key. Intercom dial tone2. Enter the Extension Direct Call Pickup code (default = 704).3. Dial the number of the ringing extension. Extension number or outside phone num-ber displays4. Complete the call and replace the handset or press the ON/OFF key.
