3-42 DBS 576HD (USA) issued September 2001 576-50-700Chapter 7. SLT Features Section 700 - OperationRelated Programming• N/AConsiderations• Extension names can be up to 10 characters in length.• The ability to make extension name assignments is allowed/restricted to anyone with a COS thatallows access to User Maintenance features. (See Chapter 4 “User Maintenance” of thisdocument.)Speed Dial Name AssignmentsYou can assign names to PSD numbers from a display telephone without entering the programmingmode. If allowed in the Extension COS, you can also assign names to SSD numbers.OperationPSD Names:To set PSD names using a large-display or small-display phone:Action Result1. Lift the handset or press the ON/OFF key.2. Press the PROG key.3. Press the * key.4. Enter 0 for the PSD Name Assignment mode. A B C D E F P80 displays (where P80 =PSD bin 80)5. Press the up or down arrow key to display the desired PSDbin number.A B C D E F PXX displays (where PXX= desired PSD bin number)6. Enter the extension name:• If using a large-display phone, press the soft key nextto the desired row of letters. (See Example 1 on page3-39.)• If using a small-display phone press the appropriateone-touch key. (See Example 2 on page 3-40.)Note: Press the FLASH key to clear any existing data7. Use the bottom row of FF keys to select a single letter.• See “Example 1. Large-display phone” on page 3-39.• See “Example 2. Small-display phone” on page 3-40.Notes:• Press the * key to erase a single entry.• Press the # key to enter a space.8. Repeat steps 6-7 as many times as necessary to enter thedesired PSD name.Note: Press the FLASH key to clear the entire entry.9. Press the HOLD key when finished. Next PSD bin number displays10. To enter another speed dial name repeat steps 5-9.
