Section 700 - Operation Chapter 7. SLT Features576-50-700 DBS 576HD (USA) issued September 2001 4-13Set Extension NamesDescriptionYou can assign names to each extension, even if the extension is not a display telephone. When theextension is called, the name appears on the display. For more information on the digital keytelephone display, see “Display Information” on page 5-39.OperationTo set extension names using either a large-display or small-display phone:Action Result1. If not already in User Maintenance mode, enter User Main-tenance mode. (See “To enter User Maintenance mode:” onpage 4-3.)81-User MAINT displays2. At the 81 level, enter 03.3. Press the HOLD key. 8103-Extension Name displays4. Press the HOLD key. 0 :EXT Number/Name displays5. Press the HOLD key. Enter EXT # displays6. Dial the extension number.7. Press the HOLD key. A B C D E F XXX displays (whereXXX = extension number)8. Enter the extension name:• If using a large-display phone, press the soft key nextto the desired row of letters. (See Example 1 on page4-19.)• If using a small-display phone press the appropriateone-touch key. (See Example 2 on page 4-20.)Note: Press the FLASH key to clear any existing data.9. Use the bottom row of FF keys to select a single letter.• See Example 1. Large-display phone on page 4-19.• See Example 2. Small-display phone on page 4-20.Notes:• Press the * key to erase a single entry.• Press the # key to enter a space.10. Repeat steps 8-9 as many times as necessary to enter thedesired speed dial name.Note: Press the FLASH key to clear the entire entry.11. Press the HOLD key to store the entry. Next extension number displays12. To set additional extension names, press the volume upand down key or press the HOLD key to move to thedesired SSD.
