Section 700 - Operation Chapter 7. SLT Features576-50-700 DBS 576HD (USA) issued September 2001 4-3FF3 Moves to Extension Name menuFF4 Moves to Verified ID Code menuFF5 Moves to Call Forward ID Code menuFF6 Moves to Message Key ID Code menuFF7 Moves to System Mode menuFF8 Moves to Walking /Station Lock TRSFF9 Moves to TRF of CWRDFF10 Moves to CID Logging Ext.Note: Once in a data entry level, you must either enter an acceptable value or restore the previousvalue before proceeding. For instance, if you change an entry to an unacceptable value and then pressFF1 to move to the PSD Assignment menu, you will not be able to proceed. You must first enter anacceptable value.OperationTo enter User Maintenance mode:Note: Your extension’s Class of Service must be properly set to allow User Maintenance access.Also, only one user may enter User Maintenance or System Programming at a time.Set Absence MessagesDescriptionThis menu item specifies absence messages.OperationTo set Absence Messages using either a large-display or small-display phone:Action Result1. At a telephone with a COS that allows user login, press theON/OFF key.2. Press the PROG key.3. Press the * key twice (* *).4. Press the CONF key. 81-User MAINT displaysAction Result1. If not already in User Maintenance mode, enter User Main-tenance mode. (See “To enter User Maintenance mode:” onpage 4-3.)81-User MAINT displays2. At the 81 level, enter 12.3. Press the HOLD key. 8112-Absence Message displays4. Press the HOLD key. Enter Msg # displays
