150Error MessagesA message may appear while you are operating the DVD Palmcorder. If a message appears, refer to thefollowing table and take appropriate corrective action.Messages on page 149 and later are arranged in alphabetical order.Message Cause & Troubleshooting Referencepage(1) Data error in a part ofimage file. Repair datanow?(2) Found error in imagefile. Repair data now?(3) Data error in allimage file. Repair alldata now?It is possible that the system cannot normally complete writing of filewhen power is turned off for some reason during recording orediting (deleting, dividing or combining scenes, or creating play list).Selecting “YES” will automatically repair the video file, but even if“NO” is selected, the same message will appear when the DVDPalmcorder is turned on next time. (Do not remove the disc while theDVD Palmcorder is recognizing it: Ignoring this will deactivate thefile repair function.)Follow the instructions on screen, taking note of the followingcautions:• Data may not be repaired, depending on the timing when powerwas turned off.• Data may not be repaired normally if data recorded on anotherrecorder is mixed in.• The repaired data may be different from the original recordedcontent because of partial deletion of defective portion.• Since the date/time for repair is added to the repaired data (onlythe corrected portion for partial repair), the original date/timeinformation will be lost.• Since all movies, and then all stills, are repaired, the order ofrecorded contents will be lost.(In case of message (2) (3) only)• See *1 on page 156.(1) Disc is not formatted.If it formats, it becomespossible to use forcamera.(2) However, when yourecord from USBterminal, please do notformat.(3) Format the disc now?DVD-R disc that was not initialized for camera use was inserted.44(1) Error has occurred.Please restart.• Error has occurred. Try to restart the DVD Palmcorder using thefollowing methods:(1) Turn power off, remove the battery pack or AC adapter/chargerand reattach it, and then turn power on again.(2) Turn power off, and reinsert the disc. Then turn power on again.(3) Take note of the number (xxxx), and call 1-800-211-PANA.• See *3 on page 156.9, 39, 42, 43(2) Error has occurred.Please reinsert a disc.(3) Error has occurred.Error code No. xxxx.Please read the manual.(4) ERROR xxxxBattery pack is almostempty. Replace it.Replace with a charged battery, or use AC adapter/charger topower the DVD Palmcorder. 38, 42Cannot combine scene. Unless consecutive scenes are selected, they cannot be combined. 109
