161Movies are notrecognized byapplication in PC.Make sure the power switch of this DVD Palmcorder is set to “VIDEO”, “ PHOTO” or “ PHOTO”. The DISC EJECT buttonis not valid when the DVDPalmcorder is connectedto PC.While the DVD Palmcorder is connected to PC, use Explorer to right-click the DVD Palmcorder drive icon and execute “Eject”. The DVD-RAM drive ofDVD Palmcorder cannotbe opened by PCExplorer or application.Error appears. Disccannot be ejected.If DVD-MovieAlbumSE is running, terminate it.When the time stamp offile in DVD-RAM isviewed on PC, it isdifferent from the actualrecording time.The file system of this DVD Palmcorder is operated on GreenwichMean Time (GMT), and time lag information has not been set. WithWindows ® as of January, 2003, the time stamp of file viewed onExplorer looks different from the actual recording time. The actualrecording time will appear for date/time indication on playbackscreen.When DVD-MovieAlbumSE isstarted, “Disc in Drive X:cannot be used”appears.A disc other than DVD-RAM is loaded in drive: DVD-MovieAlbumSEcannot be used for media other than DVD-RAM. Click the “Preference” button in the dialog box, click the “DeviceSetting” tab to choose the drive where DVD-RAM disc is loaded inthe “Drive Select” column, and then click “OK”.An image that shouldhave been recordeddoes not appear whenDVD-MovieAlbumSE isstarted.Click the “Preference” button at top right of DVD-MovieAlbumSEscreen, click the “Device Setting” tab to choose the drive whereDVD-RAM disc is loaded in the “Drive Select” column, and then click“OK”.“DISC ERROR” appearswhen releasing write-protect.A disc that was write-protected using the write-protect setting tool(WPTOOL) equipped with the UDF driver on the CD-ROM providedwith this DVD Palmcorder cannot be released on this DVDPalmcorder as is. Use the write-protect setting tool on PC to releasethe write-protect.“USBNTMAP.SYS notfound” appears whileinstalling USB driver.You have designated a folder which is different from that forWindows ® when installing USB driver: Designate the correct folder. No USB HS (high speed)connection even whenUSB2.0 card is used.Make sure that you have already installed the driver provided withthe USB2.0 card.You will need to install the driver provided by USB2.0 card maker inorder to operate the USB2.0 card at HS (high speed).145Executing “Export” onDVD-MovieAlbumSE willinterrupt readingmidway.Do not choose “Simple Export”: If you do, reading will stop midway.When executing “Export”on DVD-MovieAlbumSE,it will take time to read.• If stills are included in the range of “export”, it may take more timebecause data must be re-encoded and read.• If “Divide by Marker” is not chosen, it may take some time becausedata will be read while being re-encoded.145Symptom Cause and Correction Referencepage
