Panasonic HD1700pe Operating Instructions Manual

Also see for AJHD1700 - HD VTR W/24P: Menu information Operating instructions

102749*1AUDIO PB VRFor selecting whether the playback leveladjustment controls are to function in the EEmode when INT SG has been selected on the

0000 DIS: The INT SG output level is fixedat the UNITY level.0001 ENA: The INT SG output level can bevaried using the playback leveladjustment controls.Setup menusThe underlining (__) denotes the factory setting mode.

(continued)No./Item Description of setting No./Item Description of setting750ANA CH1 SELFor selecting the signal to be output to analogoutput CH1.0000 CH1: The CH1 signal is output.0001 CH5: The CH5 signal is output751ANA CH2 SELFor selecting the signal to be output to analogoutput CH2.0000 CH2: The CH2 signal is output.0001 CH6: The CH6 signal is output.752ANA CH3 SELFor selecting the signal to be output to analogoutput CH3.0000 CH3: The CH3 signal is output.0001 CH7: The CH7 signal is output.753ANA CH4 SELFor selecting the signal to be output to analogoutput CH4.0000 CH4: The CH4 signal is output.0001 CH8: The CH8 signal is output.754SD SDI CH1SLFor selecting the audio CH1 signal to besuperimposed onto the SD SDI output.0000 CH1: The CH1 signal is output.0001 CH2: The CH2 signal is output.0002 CH3: The CH3 signal is output.0003 CH4: The CH4 signal is output.0004 CH5: The CH5 signal is output.0005 CH6: The CH6 signal is output.0006 CH7: The CH7 signal is output.0007 CH8: The CH8 signal is output.757SD SDI CH4SLFor selecting the audio CH4 signal to besuperimposed onto the SD SDI output0000 CH1: The CH1 signal is output.0001 CH2: The CH2 signal is output.0002 CH3: The CH3 signal is output.0003 CH4: The CH4 signal is output.0004 CH5: The CH5 signal is output.0005 CH6: The CH6 signal is output.0006 CH7: The CH7 signal is output.0007 CH8: The CH8 signal is output.758JOG PROCFor selecting how to process the digital audiooutput slow signals in the JOG, VAR or SHTLmode.0000 OFF:The sound without having the digital audiooutput slow signals processed is output evenwhen the STILL mode is established.0001 ON:The sound after having the digital audio outputslow signals processed is output.759DV PB ATTFor selecting the audio output level during DVformat playback.0000 OFF:The audio output level is not attenuated.0001 ON:The audio output level is attenuated.760*1REC PT MUTEFor selecting whether to mute the sound atthe joins between recordings during DV orDVCAM format playback.0000 OFF: The sound is not muted.0001 ON: The sound is muted.761*1AUDIO INT SGFor selecting the type of internal signal.0000 TONE: A sine wave signal is selected.0001 SILNCE: A silent signal is selected.755SD SDI CH2SLFor selecting the audio CH2 signal to besuperimposed onto the SD SDI output0000 CH1: The CH1 signal is output.0001 CH2: The CH2 signal is output.0002 CH3: The CH3 signal is output.0003 CH4: The CH4 signal is output.0004 CH5: The CH5 signal is output.0005 CH6: The CH6 signal is output.0006 CH7: The CH7 signal is output.0007 CH8: The CH8 signal is output.*1: This item is not displayed when the 23/24 Hz or 25 Hz (HD orSD) mode has been selected as the system menu item No.25(SYSTEM FREQ) setting.756SD SDI CH3SLFor selecting the audio CH3 signal to besuperimposed onto the SD SDI output0000 CH1: The CH1 signal is output.0001 CH2: The CH2 signal is output.0002 CH3: The CH3 signal is output.0003 CH4: The CH4 signal is output.0004 CH5: The CH5 signal is output.0005 CH6: The CH6 signal is output.0006 CH7: The CH7 signal is output.0007 CH8: The CH8 signal is output.762AUD RATECONThis item enables signals to be recorded andplayed back without passing them throughthe rate converter in the audio input/outputsection (without engaging the digital filter).0000 OFF:The signals are recorded and played backwithout passing them through the rateconverter.0001 ON:The signals are recorded and played back afterpassing them through the rate converter.• ON/OFF control is exercised at the same time forboth recording and playback. It cannot be setdifferently for recording or playback.• ON/OFF control is exercised at the same time forCH1 to CH8. ON or OFF cannot be setindependently for each channel.• When the rate converter is set to OFF, the video inputsignals and AES (EBU) input signals must besynchronized. Moreover, the video input signals andreference signal selected by OUT REF must also besynchronized. (Noise may occur if these signals arenot synchronized.)• In the 60 Hz mode, noise may occur if OFF is set forthe rate converter.