Panasonic HD1700pe Operating Instructions Manual

Also see for AJHD1700 - HD VTR W/24P: Menu information Operating instructions

97The underlining (__) denotes the factory setting mode.*UP: With HD output (HD tape playback or up-converted output)*DW: With SD output (SD tape playback or down-converted output)No./Item Description of settingSetup menus

(continued)No./Item Description of setting680*2CC (F1)BLANK*DWFor selecting ON or OFF for the closedcaption signals in the first field.0000 BLANK: The signals are forcibly blanked.0001 THRU: The signals are not blanked.681*2CC (F2)BLANK*DWFor selecting ON or OFF for the closedcaption signals in the second field.0000 BLANK: The signals are forcibly blanked.0001 THRU: The signals are not blanked.682VO SETUP(HD)* UP(This menu isnot displayed forAJ-HD1700E.)This selects the composite output signal in HD mode.0000 THRU: The signal is output with nosetup added.0001 ADD22L: The signal is output from line22 with a 7.5% setup added.0002 ADD21L: The signal is output from line 21with a 7.5% setup added.0002 ADD20L: The signal is output from line 20with a 7.5% setup added.683VO SETUP(SD)* DW(This menu isnot displayed forAJ-HD1700E.)This selects the composite output signal in SD mode.0000 THRU: The signal is output with nosetup added.0001 ADD22L: The signal is output from line22 with a 7.5% setup added.0002 ADD21L: The signal is output from line21 with a 7.5% setup added.0002 ADD20L: The signal is output from line20 with a 7.5% setup added.676*3BLK CLIPThis function clips the signals below thepedestal level for SD SDI OUT and compositeOUT Y (luminance) signals.0000 OFF: The signals are not clipped.0001 ON: The signals are clipped.675B-CONTRASTFor adjusting the contrast (blue) of the LCDmonitor on the front panel.0 j127: :127 0: :254 127*1: This item is not displayed when the 23/24 Hz or 25 Hz (HD orSD) mode has been selected as the system menu item No.25(SYSTEM FREQ) setting.*2: This item is not displayed when the 23/24 Hz, 25 Hz (HD or SD)or 50 Hz mode has been selected as the system menu itemNo.25 (SYSTEM FREQ) setting.*3: This item is not displayed when the 50 Hz or 25 Hz (HD or SD)mode has been selected as the system menu item No.25(SYSTEM FREQ) setting.*4: This item is not displayed when the 23/24 Hz or 25 Hz (HD)mode has been selected as the system menu item No.25(SYSTEM FREQ) setting.688*2CC RECFor selecting whether to record the closedcaption signals which are superimposed onthe SD input signal.0000 OFF: The closed caption signals arenot recorded on the tape.0001 ON:The closed caption signals are recorded on thetape if they are superimposed on the SD inputsignal. In this case, they are blanked, up-converted and then recorded.• When SDTI has been selected as the input signal, theclosed caption data superimposed on thecompressed input signals is recorded on the tape inits original form regardless of this menu item’s setting.• Setup menu item No.688 does not function when theAJ-UC1700G optional board has not been installed.695*1BLANK LINEFor selecting ON or OFF for blanking for thevertical blanking period of the video signalsduring SD tape playback.0000 BLANK:All the lines are forcibly blanked.0001 THRU:None of the lines are blanked.0002 MANU:Blanking ON or OFF is selected on a line-by-line basis.When 2 (MANU) is set and the button ispressed, the display transfers to the submenu screenwhere the ON or OFF can be set for each line. Pressthe button again to return the display from thesubmenu screen.SHIFTSHIFTSubmenu screen <50Hz>Submenu screen <59/60 Hz>01LINE 11&274: :: :12LINE 22&2850000 BLANK: The lines are forcibly blanked.0001 THRU: The lines are not blanked.00LINE 7&320: :: :15LINE 22&3350000 BLANK: The lines are forcibly blanked.0001 THRU: The lines are not blanked686*2CCR MODE(SD)* DWFor selecting the cross color processingduring playback.0000 OFF: The cross color is output as is.0001 ON: The cross color can be reduced.684EDH (SD)*DWFor selecting whether to superimpose EDH onthe serial output signals.0000 OFF: EDH is not superimposed.0001 ON: EDH is superimposed.685*2ESR MODE(SD)* DWFor selecting the operation mode for edgesubcarrier reduction (ESR) in the playback circuit.0000 OFF: ESR is forcibly set to OFF.0001 AUTO: ESR is automatically set to ONor OFF in accordance with theVTR operation.687*4SDI INDEX 0*DWFor selecting whether to superimpose the VIDEOINDEX signal on the SD SDI output signal.0000 OFF: The VIDEO INDEX signal is notsuperimposed on the SD SDIoutput signal.0001 ON: The VIDEO INDEX signal issuperimposed on the SD SDIoutput signal.