| 
90Setup menusThe underlining (__) denotes the factory setting mode.The cumulative total standby time passed in the same locationincreases at such times when the same material is repeatedly usedas is the case when programs are transmitted, for example.No./Item Description of setting No./Item Description of setting401SRCPROTECTFor selecting the operation to be performedwhen the tape protection mode is establishedafter the VTR has been left standing in theSTILL status in a search mode (JOG, VAR orSHTL).0000 STEP: STEP FWD0001 HALF: Half-loading0002 T-REL: Tension release• When STEP FWD is selected, the VTR isautomatically transferred to the standby OFF (half-loading) mode after it has been left standing in theSTILL status for a total of 30 minutes (or 1 minute inthe case of a DV or DVCAM tape).• When, after tension release has been selected andthe VTR has been transferred to the tension releasemode, the VTR has been left standing in this modefor a total of 2 hours, it is automatically transferred tothe standby OFF (half-loading) mode. However, inthe case of a DV or DVCAM tape, the transfer to thetension release mode is inhibited, and the VTRoperates as if STEP FWD has been selected.402DRUM STDBYFor selecting whether the drum is to operatein the standby OFF (half-loading) mode.0000 OFF: The drum stops rotating.0001 ON: The drum continues to rotate.403STOPPROTECTFor selecting the operation to be performedwhen the tape protection mode is establishedafter the VTR has been left standing in theSTOP mode.0000 STEP : STEP FWD0001 HALF: Half-loading0002 T-REL: Tension release• When STEP FWD is selected, the VTR isautomatically transferred to the standby OFF (half-loading) mode after it has been left standing in theSTOP mode for a total of 30 minutes (or 1 minute inthe case of a DV or DVCAM tape).• When, after tension release has been selected andthe VTR has been transferred to the tension releasemode, the VTR has been left standing in this modefor a total of 2 hours, it is automatically transferred tothe standby OFF (half-loading) mode. However, inthe case of a DV or DVCAM tape, the transfer to thetension release mode is inhibited, and the VTRoperates as if STEP FWD has been selected.400STILL TIMERFor selecting the duration of the time takenafter the VTR is left standing in the STOP orsearch STILL mode (JOG, VAR or SHTL)before the tape protection mode isestablished.(Units: s = seconds, min = minutes)0000 0.5s0001 5s0002 10s0003 20s0004 30s0005 40s0006 50s0007 1min0008 2minWhen a DV or DVCAM tape isused, the time is set to 10seconds even when a setting of2 (10s) or longer is selected. |
