54Function menus*The underlining (__) denotes the factory setting mode.Functionbutton/itemSwitchingmethodCorresponding setupmenu itemF1PREVPress ___Description of settingFor multi-cue page forward scrolling.Setting___F2NEXTPress ___ For multi-cue page reverse scrolling.___F4CLRPress ___ For clearing the currently selected cue data.ENTRY must be selected as the F3 (MODE) setting.___F5AL CLRFiPress ___ When MANU is selected by SHIFT + F3 (PAGE): All the cuedata on the currently displayed page is cleared.When AUTO is selected by SHIFT + F3 (PAGE): All the cuedata on all the pages is cleared.___F3MODEToggle ___ For selecting the search or cue point registration mode.SEARCHENTRYF2 (SHIFT)CARDFiPress ___ For calling the MULTI CUE file operation menu.___F3 (SHIFT)PAGEToggle No. 131PAGE MODERefer to the setup menu.MANUAUTOF4 (SHIFT)ROTATEToggle No. 132ROTA MODERefer to the setup menu.OFFONF5 (SHIFT)CU-ROLToggle iADJNo. 011CU-ROLL TIMERefer to the setup menu.0s --- 5s ---15sF6______ ___ ______F6 (SHIFT)______ ___ ______$Clearing individual registered pointsWhen the (CLR) button on the menu ispressed, the currently selected cue point data iscleared.* The point is cleared only when “ENTRY” (cue pointregistration mode) is selected as the setting for ](MODE) on the menu.Search operationsTurn the ADJUST dial to highlight the desiredregistered point.When the PREROLL button is pressed, the prerolloperation is initiated. The tape will not be prerolled ifno cue points have been registered.Since the tape is not prerolled even if the PREROLLbutton is pressed when the cue point registrationmode is established, be absolutely sure to check thatthe search mode is established.(The time selected by the menu [(CU-ROL) setting, which is different from the normalpreroll time, takes effect as the preroll time in thismode.)F5F3F4Clearing registered points$ Clearing all the registered points togetherWhen (AL CLR) on the menu is pressedwhile the button is held down, all the cue point datacurrently selected is cleared. The range of the pointswhich are cleared is as follows depending on thesetting for (PAGE) on the menu.When “MANU” is set:All the points on the currently selected page arecleared.When “AUTO” is set:All the points on all the pages are cleared.After clearing, the search and registered pointsappear as follows depending on the setting for(PAGE) on the menu.When “MANU” is set:A return is made to the top (CUE¢1) of the pageconcerned.When “AUTO” is set:A return is made automatically to the top (CUE01) ofthe first page.* Points are cleared whether “ENTRY” (cue pointregistration mode) or “SEARCH” (search mode) is selectedas the setting for [ ] (MODE) on the menu.F3F3F3FF5* This item is not displayed when the 23/24 Hz or 25 Hz (HD orSD) mode has been selected as the system menu item No.25(SYSTEM FREQ) setting.
