82Setup menusThe underlining (__) denotes the factory setting mode. (continued)No./Item Description of setting No./Item Description of setting008CHARAV-POSFor setting the vertical positions of thecharacters for the time code and othersuperimposed displays of the HD SDIMONITOR, SD SDI MONITOR and VIDEOOUT3 connectors.0000 0: :0023 23: :0032 32When this menu item has been set, the displays areoutput to the VIDEO OUT3 connector in the DISPLAYSEL status even when the SUPER OFF setting isestablished. However, if the menu has been exited, theSUPER OFF or ON setting is followed.Furthermore, CHARA TYPE is output to the VIDEOOUT3 connector as per the menu setting.007CHARAH-POSFor setting the horizontal positions of thecharacters for the time code and othersuperimposed displays of the HD SDIMONITOR, SD SDI MONITOR and VIDEOOUT3 connectors.0000 0: :0006 6: :0037 37When this menu item has been set, the displays areoutput to the VIDEO OUT3 connector in the DISPLAYSEL status even when the SUPER OFF setting isestablished. However, if the menu has been exited, theSUPER OFF or ON setting is followed.Furthermore, CHARA TYPE is output to the VIDEOOUT3 connector as per the menu setting.*1: This item is not displayed when the 23/24 Hz or 25 Hz (HD orSD) mode has been selected as the system menu item No.25(SYSTEM FREQ) setting.*2: This item is not displayed when the 23/24 Hz, 25 Hz (HD or SD)or 50 Hz mode has been selected as the system menu itemNo.25 (SYSTEM FREQ) setting.020*2SYSFORMATFor selecting the VTR’s recording format.0000 1080i:The 1080i format is selected.0001 720p:The 720p format is selected.015AUTOSTEPFor selecting the save processing to beconducted when the memory capacity, whichenables up to 99 warning messages to besaved, has been exceeded while the error logfunction is operating.0000 OFF :99 messages are set as the upper limit, and anymore warning messages which subsequentlyoccur are not saved in the memory.0001 ON:99 messages are saved, and the next warningmessage that has subsequently occurred issaved as No.99. The warning messages alreadysaved are each shifted down by one number insuccession.011CU-ROLLTIMEFor setting the preroll time in the MULTI CUEmode.Any time from 0 to 15 seconds can be set in 1-second increments.0000 0s:: :0005 5s:: :0015 15s:010*1MONICONTROLFor setting whether to forcibly set the recorder tothe EE mode and output the player’s playbacksignals to the monitor if the PLAYER button on therecorder is pressed when the monitor is connectedonly to the recorder during deck-to-deck editing.0000 MANU:The recorder is not forcibly set to the EE mode.0001 AUTO:The recorder is forcibly set to the EE mode,and the player’s playback signals are output.006DISPLAY SEL• The following mode displays appear depending onthe format used. DVCPRO HD-LP > DVCPRO_HD-LPDVCPRO HD > DVCPRO_HDDVCPRO50 > DVCPRO_50DVCPRO > DVCPRODV > DVDVCAM > DVCAM• When setting 2 (T&S&M) is selected, an errormessage appears if a warning or error has occurred.• REC TIME and REC DATE are displayed only duringDV or DVCAM format playback. The operation modeis displayed when the DVCPRO HD-LP, DVCPROHD, DVCPRO50 or DVCPRO format is used.009CHARA TYPEFor setting the display type for thesuperimposed displays and for the HD SDIMONITOR, SD SDI MONITOR and VIDEOOUT3 connectors as well as for the SETUPMENU, etc.0000 WHITE: White characters on a blackbackground.0001 W/OUT: White characters with blackborders.
