86Setup menusThe underlining (__) denotes the factory setting mode. (continued)No./Item Description of setting118*1SP MODEINHFor selecting whether to allow or inhibitrecording on a tape which has been writtenby a format other than DVCPRO HD-LP.0000 OFF:Recording on the cassette tape is allowed.0001 ON:Recording on the cassette tape is inhibited.• When 0 (OFF) has been selected, whether recordingon the cassette tape is allowed or inhibited isdetermined by the setup menu item No.113 (RECINH) setting.• The recording format is determined by the setupmenu item No.020 (SYS FORMAT) setting.131PAGE MODEFor selecting what cue point operation is tobe performed when the multi cue function hasbeen set to ON.0000 MANU:Operation is confined within the selected page,and 6 cue points can be registered.0001 AUTO:When the page whose cue points are beingregistered becomes full, operation isautomatically transferred to the next page, andregistration is continued. A total of 60 cuepoints on up to 10 pages can be registered.132ROTA MODEFor selecting whether to perform theregistration operation if all the cue pointshave already been registered when the multicue function has been set to ON .0000 OFF:No further cue points are registered.0001 ON:The registration operation is continued. If “MANU”has been selected as the setup menu item No.131(PAGE MODE) setting, the next cue point isregistered at CUE¢1 on the page concerned; if“AUTO” has been selected, it is registered at CUE01.No./Item Description of setting140*1OUTPUTFor selecting the output signals.0000 EE::The input signals selected by setup menu itemsNo.600 (VIDEO IN SEL) and No.713 (CH1 IN SEL)to No.724 (D IN SEL 78) are output.:The input signals selected by setup menu itemsNo.600 (VIDEO IN SEL) and No.713 (CH1 IN SEL)to No.724 (D IN SEL 78) are output:0001 TAPE :The signals played back from the tape are output.:The simultaneous playback signals are output.In order to select the output signals during recording orediting, set setup menu item No.302 (CONFI EDIT).141*1VOLUMEFor setting what is to be controlled by theaudio volume controls on the front panel.0000 REC:The controls function as REC volume controls.0001 PB:The controls function as PB volume controls.0002 AUTO:Normally, the controls function as PB volumecontrols. However, during recording or in theEE/INPUT CHECK status, they automaticallyfunction as REC volume controls.142*1AUDIO UNITYFor selecting the conditions under which theAUDIO UNITY lamp on the front panel is to light.0000 IN:The lamp lights when all the audio input levelsare set to the UNITY level.0001 OUT:The lamp lights when all the audio outputlevels are set to the UNITY level.0002 IN/OUT :The lamp lights when all the audio input andoutput levels are set to the UNITY level.143CASSTTLIGHTFor setting whether the lighting of the tapemechanism is to be set to ON or remain OFF.0000 OFF:The mechanism does not light even when acassette is inserted.0001 ON:The mechanism lights when a cassette is inserted.144TC INPUTFor switching the preset registration methodfor the time code.0000 NORMAL:The time code is input starting with the left-most digit.0001 REV :The time code is input from the high-order digitbut is displayed from the right-most digit.145FRONT LCDFor selecting whether the LCD monitor display onthe front panel is to be turned on or off.0000 OFF:The display is turned off.0001 ON:The display is turned on or off in synchronizationwith the screen saver operation for the time codedisplay area.133KEY BEEPFor setting the volume of the sound heardwhen the keys are touched.0000 OFF0001 LOW0002 HIGH134ALARM BEEPFor setting the volume of the alarm tone.0000 OFF0001 LOW0002 HIGHIf the fan motor has shut down, the alarm tone is soundedat the HIGH volume level regardless of this setting.*1: This item is not displayed when the 23/24 Hz or 25 Hz (HD orSD) mode has been selected as the system menu item No.25(SYSTEM FREQ) setting.116EJECT LAMPFor selecting whether the EJECT lamp is to remainlighted or go off after the cassette tape has beenejected.0000 MODE1:The EJECT lamp remains lighted.0001 MODE2:The EJECT lamp goes off.
