52Function menusMoving to registered pointsThe highlighting on the registered point display area ismoved by turning the ADJUST dial. It is moved in theascending order of points when the dial is turnedclockwise and in the descending order of points whenit is turned counterclockwise. When “AUTO” hasbeen selected as the (PAGE) setting on the menu, the highlighting can be movedalso to the previous or next page.• Depending on the setting selected for(ROTATE) on the SHIFT> menu, thefollowing applies to moving the highlighting in theascending order of points.When “OFF” is set:The highlighting cannot be moved from page 9 topage 0.When “ON” is set:The highlighting can be moved from page 9 to page 0.• In moving in the descending order of points, thehighlighting cannot be moved from page 0 to page 9.Search point and registered pointoperationsEach time the (MODE) button of the menu is pressed, the search mode and cue pointregistration mode are switched alternately. Performthe search point or registered point operations in therespective mode.• When the power is turned on, the search point orregistered point, whichever was established whenthe power was last turned off, is established.• When the setting for (PAGE) or (ROTATE)on the menu has been changed,“01” (page 0/point no.1) is set for both the searchand registered points.Cue point registration modeIt is possible to register points to which the tape is tobe prerolled. When the display page has beenchanged using the (PREV) or (NEXT) buttonon the menu, the following applies dependingon the setting for (PAGE) on the menu.When “MANU” is set:Both the search and registered points move to the topof the changed page.When “AUTO” is set:Only the registered point moves to the top of thechanged page; the search point does not move.F3F2F1F4F3F3F4F3A maximum of 60 cue points can be set on these menuscreens. When “AUTO” has been selected as the(PAGE) setting on the AUTO PAGE mode menu, up to 10 pages of cue points with 6 cue points oneach page can be managed on a page-by-page basis.The 60 cue points are indicated using the page numberdisplay and registered point display areas.Cue points cannot be registered, prerolled, etc. if asetting other than “ENA” has been selected as the setupmenu item No.001 (LOCAL ENA) setting in the REMOTEmode.F3F1SHIFT F2 F3 F4 F5 F6Page number display areaRegistered point display area Cue point data display areasPage number display areaThe page number from 0 to 9 is indicated here.Registered point display areaOn each page, six cue point data managed byregistered point numbers are displayed. A pointwhose registered point number is highlighted istargeted for registration and search.Shown below is the correlation between the pagenumbers and registered point numbers.Page no. Registered points Page no. Registered points0 01–06 5 51–561 11–16 6 61–662 21–26 7 71–763 31–36 8 81–864 41–46 9 91–96Page operationsPages can be scrolled in the forward or reverse directionusing the [F1] (PREV) or [F2] (NEXT) function buttons.• Depending on the setting selected for [F4] (ROTATE)on the menu, the following applies toscrolling pages in the forward direction.When “OFF” is set:Page 0 cannot be scrolled forward from page 9.When “ON” is set:Page 0 can be scrolled forward from page 9.• In scrolling pages in the reverse direction, page 9cannot be scrolled in reverse from page 0.F1SHIFT F2 F3 F4 F5 F6F4F1 F2
