212 ICX (International), issued March/1999 ICX-35-700Chapter 6. DSLT Features Section 700 - OperationNon-Verified Account CodesNon-Verified Account codes are voluntary codes. (i.e., You do not have to enter an account codebefore making a call.)You can assign Non-Verified Account codes to both incoming and outgoing calls. To assign anaccount code to an outgoing call, you enter the account code before making the call or during the call.To assign an account code to an incoming call, you enter the account code during the call.OperationTo enter an account code before making a call:To enter an account code during an outside call:Verified Account CodesStations restricted from outside call origination by Toll Restriction Service (TRS) - Call Barring canbe allowed to make outgoing calls by entering a Verified Account code that changes the TRS (CallBarring). After a call is made, the Call Logging record for the call will show the verified accountcode.OperationTo make an outside call that requires an account code:Action Result1. Lift the handset or press the ON/OFF key. Intercom dial tone2. Enter the Account Code feature code (default = 8#).3. Enter the Account Code (up to 10 digits).4. Press the # key.5. Press a vacant trunk key or enter a trunk access code(default = 9 [UK/HK], 0 [Taiwan, Malaysia, Indonesia], or81-84).6. Dial the phone number.Action Result1. During a call, press the MEMORY key.2. Press the # key.3. Enter the Account Code (up to 10 digits).4. Press the # key.Action Result1. Lift the handset or press the ON/OFF key. Intercom dial tone2. Enter the Verified Account ID code (default = 8#).
