Section 700 - Operation Chapter 3. System FeaturesICX-35-700 ICX (International), issued March/1998 69To clear the ID Code:Hardware Requirements• N/AConsiderations• N/ACLI/DDI Voice Mail ID CodeCLI/DDI calls may be sent directly to voice mail through the used of the DDI Voice Mail ID Code. Aprefix and suffix may be specified to be sent to the voice mail as well as a chosen number of DDIdigits.Either no digits (default), the last two digits of the DDI, the last three digits of the DDI or the entireDDI number may be sent.The prefix may be up to eight digits including 0-9, *, # and pause (REDIAL).The suffix may be up to eight digits including 0-9, *, # and pause (REDIAL).Hardware Requirements• N/AConsiderations• Each pause is a fixed 1 second delay.• If you do not assign a Voice Mail ID Code, the DDI digits will be sent to voice mail.• Only one Voice Mail ID Code is available for the system.Disconnect SignalBeginning with CPC Version 3.0, either busy tone or silence can be sent to a third-party voice mailsystem when the caller hangs up.High Priority Message WaitingMessage waiting displays and LEDs may be utilized by the Voice Mail system to indicate that a VoiceMail message has been left in your mail box. When you retrieve the message, the message waitingindications are cleared.Hardware Requirements• N/AAction Result1. Go offhook or press ON/OFF key.2. Dial the Call Forward ID Code (default = 715 [UK/HK or715# [Taiwan, Malaysia, Indonesia]).Enter V.M. ID displays3. Press the HOLD key. Cleared V.M. ID displays4. Go onhook or press ON/OFF key.
