70 ICX (International), issued March/1998 ICX-35-700Chapter 3. System Features Section 700 - OperationConsiderations• For more information on setting and retrieving message waiting, see the telephone operationsections that follow in this document.Message Key ID CodeOn a large-display phone you can use a Message key (labelled MSG) to either retrieve Voice Mailmessages or respond to telephone messages. When responding to Voice Mail messages from a 3rdparty Voice Mail system, the Message key needs to have an ID code set to identify the caller to theVoice Mail system. You can also use the Message key to program a Voice Mail password.You must program the Message key using the User Maintenance feature “Set Message Key ID Code”on page 86.OperationTo retrieve a message at Voice Mail:Hardware Requirements• N/AConsiderations• N/AVoice Mail Transfer KeyDescriptionThe Voice Mail Transfer (VM/TRF) key allows you to transfer calls to voice mailboxes withoutwaiting for voice mail to answer. You can assign a Voice Mail Transfer key from a phone or throughsystem programming.Two Voice Mail Transfer keys are available. VM Transfer Key 1 will transfer to a voice mailextension number. Voice Mail Transfer Key 2 will transfer to the voice mail pilot number.OperationTo assign a Voice Mail Transfer key from a phone:Action Result1. Press the MSG key. Voice mail instructions2. Follow the Voice Mail instructions for retrieving messages.3. When finished retrieving messages, replace the handset orpress the ON/OFF key.Action Result1. Lift the handset or press the ON/OFF key. Intercom dial tone2. Press the PROG key.
