220 ICX (International), issued March/1999 ICX-35-700Chapter 6. DSLT Features Section 700 - OperationOperationTo set Call Forwarding - No Answer:To cancel Call Forwarding - No Answer:Call Forwarding and Do-Not-DisturbThe System allows you to set or cancel both Call Forwarding and Do-Not-Disturb (DND) for yourown extension in one step.Action Result1. Lift the handset or press the ON/OFF key. Intercom dial tone2. Enter the appropriate Set Call Forwarding code:• For your extension, enter 723 (UK/HK) or 723# (Taiwan,Malaysia, Indonesia).• For another extension, enter 743 (UK/HK) or 743# (Tai-wan, Malaysia, Indonesia).3. If setting Call Forwarding for another extension, dial thenumber of the extension whose calls you wish to forward4. Dial the destination number:• If forwarding to another extension, dial the extensionnumber.• If forwarding to an outside number, press the # key thenenter the SSD bin number.Note: Any outside number used for Call Forwarding mustalready be programmed into speed dialling. (For instruc-tions, see “Speed Dialling” on page 243.)5. Replace the handset or press the ON/OFF key.Action Result1. Lift the handset or press the ON/OFF key. Intercom dial tone2. Enter the appropriate Cancel Call Forwarding code:• For your extension, enter 733 (UK/HK) or 733# (Taiwan,Malaysia, Indonesia).• For another extension, enter 753 (UK/HK) or 753# (Tai-wan, Malaysia, Indonesia).3. If cancelling Call Forwarding for another extension, dial theextension number.4. Replace the handset or press the ON/OFF key.
