224 ICX (International), issued March/1999 ICX-35-700Chapter 6. DSLT Features Section 700 - OperationBroker’s HoldBroker’s Hold allows you to toggle between the current call and the last held call by pressing theHOLD key.OperationTo place a call on Broker’s Hold:Hardware Requirements• N/AConsiderations• N/ACall ParkYou can use the Call Park function to transfer a call, even if you cannot locate the intended recipientof the call.Trunk, extension, and network calls may be parked.There are two ways for an extension to park a call on the ICX. One way is to park the call at thereceiving extension and to retrieve the parked call at another extension by dialling the park answercode plus the parking extension number. The other way is to park the call at another extension and dialthe park transfer answer code at the other extension to retrieve the call.OperationTo park a call on this extension:Action Result1. Pick up the first call.2. Press the HOLD key. First call on hold3. Pick up the second call.4. Press the HOLD key. Second call on hold, first call retrievedAction Result1. While on a call, press the HOLD key. • Current call on hold2. Enter the Call Park Hold access code (default = 771 [UK/HK] or 771# [Taiwan, Malaysia, Indonesia]).3. If necessary, page the party that needs to retrieve the call.
