Section 700 - Operation Chapter 6. DSLT FeaturesICX-35-700 ICX (International), issued March/1999 249To change the Walking TRS/Station Lockout security code:Considerations• Walking TRS (Call Barring) and Station Lockout use the same security code.• If you enter an incorrect key code and then try to dial, the phone will issue a busy tone.• If station lockout is set, the phone is limited to the Station Lockout TRS (Call Barring) Classoutside calling abilities. This TRS (Call Barring) Class should be carefully selected to only allowthe desired call types.• Without Walking TRS (Call Barring) /Station Lockout Security Code, you cannot set the StationLockout feature.• You cannot override station lockout using Walking TRS (Call Barring) feature.Step Call (Reset Call)CPC-96, CPC-288, and CPC-576 All VersionsDescriptionIf you dial a busy extension, the System allows you to quickly dial another extension by simplypressing the last digit of the new extension number.OperationTo use Step Call (Reset Call) to dial another extension (after a busy extension):Example: You dial extension 213, but it is busy. To dial extension 214, enter 4.Action Result1. Lift the handset. Intercom dial tone2. Enter the Walking TRS (Call Barring)/Station LockoutSecurity Code Change code (default =749 [UK/HK] or749# [Taiwan, Malaysia, Indonesia]).3. Enter the current Walking TRS (Call Barring)/Station Lock-out security code.4. Enter the new Walking TRS (Call Barring)/Station Lockoutsecurity code.5. Replace the handset.Action Result1. Lift the handset or press the ON/OFF key. Intercom dial tone2. Dial an extension number. Busy tone3. Dial the last digit of the next extension number.
