240 ICX (International), issued March/1999 ICX-35-700Chapter 6. DSLT Features Section 700 - OperationHardware Requirements• N/AConsiderations• The trunk call type may be either multiple ring, direct, or camp-on.• The system does not send the offhook signal under the following conditions:• During a conference call• During an OHVA or Busy override• Data Privacy is enabled• The receiving telephone is a 3rd party voice mail.Offhook Voice AnnounceCPC-96, CPC-288, and CPC-576 Version 2.0DescriptionYou can interrupt a busy extension when making an Intercom Call, and then use the Off-Hook VoiceAnnounce (OHVA) feature to make an announcement that only the called party can hear. You can alsotransfer a held call to a busy extension after making the announcement using this feature.OperationTo make an OHVA :To transfer a call using OHVA:Action Result1. Lift the handset or press the ON/OFF key.2. Dial the extension number. Busy signal3. Enter the OHVA feature access code (default = 8 [UK/HK]or 8# [Taiwan, Malaysia, Indonesia]).4. Make your announcementAction Result1. While on a call, press the HOLD key. Current call on hold2. Dial the extension number to which the call is being trans-ferred.Busy signal3. Enter OHVA feature access code (default = 8 [UK/HK] or8# [Taiwan, Malaysia, Indonesia]) and announce the call tobe transferred.4. If transfer is not accepted, press the FL/R key. Transfer cancelled5. Replace the handset.
