218 ICX (International), issued March/1999 ICX-35-700Chapter 6. DSLT Features Section 700 - OperationOperationTo set Call Forwarding-All Calls:To cancel Call Forwarding-All Calls:Call Forwarding - BusyWhen Call Forwarding - Busy is set, all incoming calls to a busy extension are forwarded.Action Result1. Lift the handset or press the ON/OFF key. Intercom dial tone2. Enter the appropriate Set Call Forwarding code:• For your extension, enter 721 (UK/HK) or 721# (Taiwan,Malaysia, Indonesia).• For another extension, enter 741 (UK/HK) or 741# (Tai-wan, Malaysia, Indonesia).3. If setting Call Forwarding for another extension, dial thenumber of the extension whose calls you wish to forward.4. Enter the destination number:• If forwarding to another extension, dial the extensionnumber.• If forwarding to an outside number, press the # key thenenter the SSD bin number.Note: Any outside number used for Call Forwarding mustalready be programmed into speed dialling. (For instruc-tions, see “Speed Dialling” on page 243.)5. Replace the handset or press the ON/OFF key.Action Result1. Lift the handset or press the ON/OFF key. Intercom dial tone2. Enter the appropriate Cancel Call Forwarding code:• For your extension, enter 731 (UK/HK) or 731# (Taiwan,Malaysia, Indonesia).• For another extension, enter 751 (UK/HK) or 751# (Tai-wan, Malaysia, Indonesia).3. If cancelling Call Forwarding for another extension, dial theextension number.4. Replace the handset or press the ON/OFF key.
