Registration list viewSlave list that is registered to master is indicated. To indicate the list, execute “Transfer From MainUnit”Routing table viewRoute from master to slave is indicated by tree-shaped structure. Name and Unit No. (number ingrouping symbol) are indicated in addition.The left side of tree is upper level (the top level is master), the right side is lower level. Andmid-slave transfers the data to slave of right side by using repeater function. (In example, slave1transfers data to slave2)Terminal equipment list viewTerminal equipment that is connected to slave is indicated. By clicking slave in routing table view,terminal equipment that is connected to the slave appears. (In example, slave3 is clicked)1.4.2 System requirementsSoftware name Configurator KROS Windows®2000 / Windows®XP / Windows®VistaAvailable hard disk space More than 5MBRecommended CPU Pentium 300MHz or moreRecommended system RAM More than 128MB (According to OS)Recommended screenresolution 800 x 600 or moreRecommended color quality High Color (16bit) or more1.4.3 Applicable cableType of computer and applicable cable (RS232C cable)Type ofcomputerConnector ofcomputer sideConnector ofwireless unit side Specification RecitalDOS/V DSUB 9-pinfemale DSUB 9-pin female straight typePurchase commercial item.Popular name :For DOS/V RS232C cablestraight 9 pin type *Note1) It is impossible to use setting tool via RS485 port of wireless unit.Note2) It is recommended to use shielded cable.Note3) To connect wireless unit to computer that has no serial port, USB/RS232C converter isneeded besides above cable.* When using DSUB 9-pin female-female straight cable, connect computer and main unit directly.If using male-female straight cable, use attached gender changer in main unit.1-12Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.ctiautomation.net - Email: info@ctiautomation.net