When the below dialog is displayed, click “OK”.Below dialog is displayed during data communication.After completing to transfer to master correctly, it returns to main window.Note： When using I/O type, at 1:N topologySlave is located as same position as equipment with MEWTOCOL protocol.If equipment with MEWTOCOL protocol is connected to slave, Unit No of terminalequipment and slave should be set to different No.5.5.4 Delete terminal equipment(1) Click one terminal to delete in terminal list view after selecting one slave in routing table.And select “Routing Setting” -> “Terminal Setup” -> “Delete” in menu.When the below dialog is displayed, if it is OK, click “OK”.5-22Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.ctiautomation.net - Email: info@ctiautomation.net
