2.3 SwitchesOperating mode switchSetting position of switch FunctionSET During registering slave unit, Initializing, using setting toolRUN During operating, using setting tool (partically reined)TEST During using communication test, field intensity monitor by main unitChange of operating mode switch becomes effective soon.It is possible to use in RUN mode with setting tool, software version 1.20 or later.Unit No. switchSet Unit No. of wireless unit. Change it by precision slotted screwdriver carefully.Set first digit “x1”, and second digit “x10”.Set Unit No. of master unit “00”, slave unit “00-99”Communication channel switchChange communication channel (00-F5). Change it by precision slotted screwdriver carefully. It ispossible to select 89 group of group channel in addition to 76ch (00-4B) of fixed channel.Group channel has function that connectable channel is selected automatically from multiple fixedchannels. When using repeater, use fixed channel.When using group channel, channel in the same communication area is lessened andcommunication time becomes long.Refer to specifications about usable frequency.Reference： <9.1 Specifications>2-7Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.ctiautomation.net - Email: info@ctiautomation.net
