1.3 SYSTEM BASICS16 VOICE PROCESSING SYSTEM OVERVIEWSystem ComponentsAC Inlet:Connects the power cable to an AC outlet dedicated for the VPS.Power Indicator:Indicates system status — when flashing, the system is off-line (not ready to receive calls).MODE (DIP Switch):(Check the status of this switch only at start-up.) Provides the following additional functions:Table 1Position Additional Function0 Normal setting. (All switches in 0 position.)1 Initialises RS-232C parameters.RS-232C default parameters: 9,600, N, 8, 12 *1 Auto Configuration is automatically executed andall ports are set for Automated Attendant service.3 *1 Auto Configuration is automatically executed andall ports are set for Voice Mail service.4 Reserved.5Initialises the VPS. Clears all voice data (exceptUser 1 and User 2 prompts) and returns all systemparameters to the default setting.6-7 Reserved.8Initialises the VPS. Clears all voice data andreturns all system parameters to the default setting.This makes more recording time available — about1 h — if User Prompts have been recorded.CAUTION: User 1 and User 2 Prompts areerased!9 Reserved.10 *2 Auto Configuration is automatically executed andall ports are set for Automated Attendant service.11 *2 Auto Configuration is automatically executed andall ports are set for Voice Mail service.12 All service prompts are set to System Prompts(Factory-recorded English prompts).13 All service prompts are set to User 1 Prompts(Factory-recorded Spanish prompts).0 10 10 10 1•1•2•3•40 10 10 10 1•1•2•3•40 10 10 10 1•1•2•3•40 10 10 10 1•1•2•3•40 10 10 10 1•1•2•3•40 10 10 10 1•1•2•3•40 10 10 10 1•1•2•3•40 10 10 10 1•1•2•3•40 10 10 10 1•1•2•3•40 10 10 10 1•1•2•3•4
