119Setting Sample1. In the case of setting the expiry date after 1 month (today included/today not included):In the case of the setting pattern above (1 month after), the date to be marked as follows:Today Marking ResultToday included Today not includedJanuary 1st February 1st January 31stJanuary 31st March 1st February 28th*(February 29th)February 1st March 1st February 28th*(February 29th)February 28th March 28th March 27thMarch 1st April 1st March 31stMarch 31st May 1st April 30thApril 1st May 1st April 30thApril 30th May 30th May 29thMay 1st June 1st May 31stMay 31st July 1st June 30thJune 1st July 1st June 30thJune 30th July 30th July 29thToday Marking ResultToday included Today not includedJuly 1st August 1st July 31stJuly 31st August 31st August 30thAugust 1st September 1st August 31stAugust 31st October 1st September 30thSeptember 1st October 1st September 30thSeptember 30th October 30th October 29thOctober 1st November 1st October 31stOctober 31st December 1st November 30thNovember 1st December 1st November 30thNovember 30th December 30th December 29thDecember 1st January 1st December 31stDecember 31st January 31st January 30th* The dates in parentheses are used in the case of leap years.2. In the case of setting the expiry date after 1 year and 3 months (setting to 12 months + 3 months = after 15 months):When the date of today is “January 1st” with the above setting pattern, the date to be marked is “April 1st”.3. In the case of setting the expiry date after 1 month and 15 days (setting to 30 days + 15 days = after 45 days):When the date of today is “January 1st” with the above setting pattern, the date to be marked is “February 15th”.Notice• The following items, Date, Lot, and Expiry date are marked based on the internal clock of the laser marker. The internalclock might be deviated due to the error in internal part or battery drain. Therefore, be sure to check the time of theinternal clock before the operation.ME-LPMSZ-OP-7