Panasonic LP-M Series Operation Manual
Also see for LP-S Series: Serial Communication GuideMaintenance GuideManual
                                                                                                                                                                                                                                                                                                                    | |
Contents
|
131Description2 Offset:The whole screen is offset for each file.Rotation Offset:Rotates the object to the rotation direction around the original point.Setting Range -180.00 to +180.00 degree (0.01 degree unit)+Y-Z-Y+X-X+ZRotation (+) Rotation (-)X/Y Offset :Shifts the marking position to the X/Y direction.Setting Range -60.000 to +60.000 mm (LP-M500 / LP-Z130)*-45.000 to +45.000 mm (LP-S500)*Z Offset (LP-M / LP-Z series only) :Shifts the object to Z direction.Setting Range -22.000 to +22.000 mm (LP-M500)*-25.000 to +25.000 mm (LP-Z130)*Notice• The work distance adjusted with the Z-offset setting should conform with the actual distance from the head base tothe marking surface for the proper marking performance.3 Overwriting Frequency :Number of overwriting. The number of overwriting marking is specified by one trigger input.Setting Range 1 to 9999 timesNotice• Overwriting marking and marking of bold character may affect the quality of marking. Check it by a trial before usingthese functions.• The function of overwriting is unavailable for the marking to flying object.4 Overwriting Interval :The interval period at overwriting is set.Setting Range 0.0 to 9.9 seconds or 0 to 60 seconds5 Marking Pitch :Common marking condition: Specifies the pitch of the marking lines for the bold character.Common bar code condition: Specifies the pitch of the marking lines for the bar code and composite code.Setting Range 0.010 to 2.000 mmMarking PitchLine Width of Bold Character Line Width of Bold CharacterMarking PitchReference• The width of the bold line changes when the setting value on the “Line Width” is different from that marked with laser.• This correction is invalid for logo data.• It is recommended that the marking pitch is specified so that it is an integral multiple of half of the marking line width.* For the setting range of the other model, refer to “Input Setting Value by Series” (P.296).ME-LPMSZ-OP-7 |
Related manuals for Panasonic LP-S Series
This manual is suitable for:
LP-S SeriesLP-M SeriesLP-M200LP-M200-CHNLP-M200-SLP-M200-S-CHNLP-M205LP-M205-CHNLP-M205-SLP-M205-S-CHNLP-M500LP-M500-CHNLP-M500-SLP-M500-S-CHNLP-M505LP-M505-CHNLP-M505-SLP-M505-S-CHNLP-MA00LP-MA00-CHNLP-MA05LP-MA05-CHNLP-MA05-SLP-MA05-S-CHNLP-MA06LP-MA06-CHNLP-MA06-SLP-MA06-S-CHNLP-S200LP-S200-CHNLP-S200-SFLP-S202LP-S202-CHNLP-S202-SFLP-S205LP-S205-CHNLP-S205-SFLP-S500LP-S500-CHNLP-S500-SFLP-S500WLP-S500W-CHNLP-S502LP-S502-CHNLP-S502-SFLP-S505LP-S505-CHNLP-S505-SFLP-S505WLP-S505W-CHNLP-Z SeriesLP-Z130LP-Z130-CHNLP-Z250LP-Z250-CHNLP-Z256LP-Z256-CHN
manualsdatabase
Your AI-powered manual search engine