Panasonic LP-M Series Operation Manual
Also see for LP-S Series: Serial Communication GuideMaintenance GuideManual
                                                                                                                                                                                                                                                                                                                    | |
Contents
|
148Description4 Fine Tune Z (LP-M / LP-Z series only):Specifies the amount of adjustment for Z axis to the selected row or/and column.Setting Range -22.000 to +22.000 mm (LP-M500)*-25.000 to +25.000 mm (LP-Z130)*5 Rotation Angle:Specifies the rotation angle of the selected row or/and column. The rotation center is the origin of the each patternwhich is specified in character, logo or barcode condition.Setting Range -180.00 to +180.00 degree6 Laser Power Adj. (Laser Power Adjustment):Specifies the laser power adjustment amount of the pattern which is specified in the above Fine Adj. Instruction,Row, and Column.Setting Range -50 to +50 %Reference• For the marking pattern which more than one fine adjustment is set, the laserpower adjustment value is the total amount of the each settings.In that case, the available range of the laser power adjustment is +/- 50%.1st line : laser power adjustment +20%1st row : laser power adjustment 10%[Total amount of the laser power] 20%+10%=30%.7 STEP-REPEAT Fine Adj. (STEP-REPEAT Fine Adjustment List):List of fine adjustment instruction for each pattern.Setting Range 0 to 399 (totally 400 instructions)Reference• With selecting the fine-adjust setting in this list and open the image screen, the selected pattern is indicated ingreen.• To show the settings of each pattern, select the line of the list and click it again.8 INPUT:Sets the instructing content to the selected line from the list of the fine adjustment for the Step & Repeat bypressing INPUT button. (Not pressing INPUT button does not activate the fine adjustment.)Reference• If some parameters are already set in the selected line, they are overwritten with clicking “INPUT”. Make sure thatthe correct line is selected before clicking “INPUT”.9 DELETE:Deletes the instruction for fine adjustment set to the list of the fine adjustment for the Step & Repeat.10 ALL DEL:Deletes all instruction for fine adjustment set to the list of the fine adjustment for the Step & Repeat.* For the setting range of the other model, refer to “Input Setting Value by Series” (P.296).Reference• The settings of “Common Condition” in “General Condition” are reflected after the settings in “Step & Repeat” areapplied.A A A A A A A A A AAAAAME-LPMSZ-OP-7 |
Related manuals for Panasonic LP-S Series
This manual is suitable for:
LP-S SeriesLP-M SeriesLP-M200LP-M200-CHNLP-M200-SLP-M200-S-CHNLP-M205LP-M205-CHNLP-M205-SLP-M205-S-CHNLP-M500LP-M500-CHNLP-M500-SLP-M500-S-CHNLP-M505LP-M505-CHNLP-M505-SLP-M505-S-CHNLP-MA00LP-MA00-CHNLP-MA05LP-MA05-CHNLP-MA05-SLP-MA05-S-CHNLP-MA06LP-MA06-CHNLP-MA06-SLP-MA06-S-CHNLP-S200LP-S200-CHNLP-S200-SFLP-S202LP-S202-CHNLP-S202-SFLP-S205LP-S205-CHNLP-S205-SFLP-S500LP-S500-CHNLP-S500-SFLP-S500WLP-S500W-CHNLP-S502LP-S502-CHNLP-S502-SFLP-S505LP-S505-CHNLP-S505-SFLP-S505WLP-S505W-CHNLP-Z SeriesLP-Z130LP-Z130-CHNLP-Z250LP-Z250-CHNLP-Z256LP-Z256-CHN
manualsdatabase
Your AI-powered manual search engine