171 2D Code Pattern FontThe 2D code pattern font shown below have been previously registered to the font installed in the CD-ROM.Refer to “2-15-4 Font File” (P.217) to register the pattern fonts on the laser marker.Font imageCharactercode 2230 (HEX) 2231 (HEX) 2232 (HEX) 2233 (HEX) 2234 (HEX) 2235 (HEX) 2236 (HEX) 2237 (HEX)Pattern type Quiet zone Module Finder pattern Alignment Quiet zoneFont imageCharactercode 2238 (HEX) 2239 (HEX) 8121 (HEX) 8122 (HEX) 8123 (HEX) 8124 (HEX) 8125 (HEX) 8126 (HEX)Pattern type Quiet zone ModuleFont imageCharactercode 8127 (HEX) 8128 (HEX) 8129 (HEX) 812A (HEX) 812B (HEX) 812C (HEX) 812D (HEX) 812E (HEX)Pattern type ModuleFont imageCharactercode 812F (HEX) 8130 (HEX) 8131 (HEX) 8132 (HEX) 8133 (HEX) 8134 (HEX) 8135 (HEX) 8136 (HEX)Pattern type ModuleFont imageCharactercode 8137 (HEX) 8138 (HEX) 8139 (HEX) 813A (HEX) 813B (HEX) 813C (HEX) 813D (HEX) 813E (HEX)Pattern type ModuleFont imageCharactercode 813F (HEX) 8140 (HEX) 8141 (HEX) 8142 (HEX) 8143 (HEX) 8144 (HEX) 8145 (HEX) 8146 (HEX)Pattern type Border patternFont imageCharactercode 8147 (HEX) 8148 (HEX) 8149 (HEX) 814A (HEX) 814B (HEX) 814C (HEX)Pattern type Border patternReference• For 2D pattern font, a total of 60 fonts can be registered in any code from 2230 (HEX) to 2239 (HEX), or from 8121 (HEX)to 8152 (HEX). When a new pattern font is created and registered, overwrite the font pattern registered in any code from2230 (HEX) to 2239 (HEX), or from 8121 (HEX) to 814C (HEX), or register it on any code from 814D (HEX) to 8152 (HEX).Do not use other character code.• If a reading failure occurs with the standard pattern shown above (2DCODE.FON), use the font maker provided to createthe proper pattern. Refer to “Font Maker Operation Manual” for details.ME-LPMSZ-OP-7
