Panasonic Lumix DMC-FX33 Operating Instructions Manual

Also see for DMC-FX33A - Lumix 8.1MP Digital Camera: Instrucciones básicas de funcionamiento

Contents

Others104VQT1J82Message DisplayConfirmation messages or error messageswill be displayed on the screen in somecases.The major messages are described belowas examples.[THIS MEMORY CARD IS LOCKED]The Write-Protect switch on the SDMemory Card and the SDHC Memory Cardare moved to [LOCK]. Move the switchback to unlock it. (P13, 85, 90)[NO VALID PICTURE TO PLAY]Record a picture or insert a card with arecorded picture and then play it.[THIS PICTURE IS PROTECTED]Delete or overwrite the picture aftercanceling the protect setting. (P85)[THIS PICTURE CANNOT BE DELETED]/[SOME PICTURES CANNOT BEDELETED]Pictures not based on the DCF standardcannot be deleted. If you want to deletesome pictures, format the card after savingnecessary data on a PC etc. (P90)[NO ADDITIONAL DELETE SELECTIONSCAN BE MADE]You have exceeded the number of picturesthat can be set at one time with [MULTI] in[TITLE EDIT], [TEXT STAMP], or[MULTI DELETE].Stamp the text and date informationdeleted or input, then retry the operation.More than 999 favorites have been set.[CANNOT BE SET ON THIS PICTURE][TITLE EDIT], [TEXT STAMP] or DPOFcannot be set for pictures not based on theDCF standard.[NOT ENOUGH SPACE ON BUILT-INMEMORY]/[NOT ENOUGH MEMORY ONTHE CARD]There is no space left on the built-inmemory or the card.• When you copy pictures from the built-inmemory to the card (batch copy), thepictures are copied until the capacity ofthe card becomes full.[SOME PICTURES CANNOT BECOPIED]/[COPY COULD NOT BECOMPLETED]The following pictures cannot be copied.• When a picture with the same name asthe picture to be copied exists in the copydestination.(Only when copying from a card to thebuilt-in memory.)• Files not based on the DCF standard.Moreover, pictures recorded or edited byother equipment may not be copied.[BUILT-IN MEMORY ERRORFORMAT BUILT-IN MEMORY?]This message will be displayed when youformatted the built-in memory on a PC.Format the built-in memory on the cameraagain. (P90) The data on the built-inmemory will be deleted.[MEMORY CARD ERRORFORMAT THIS CARD?]The card format cannot be recognized bythe camera. Format the card again with thecamera after saving necessary data on aPC etc. (P90)[PLEASE TURN CAMERA OFF ANDTHEN ON AGAIN]This message appears when the camera isnot operating properly. Turn the camera offand on. If the message persists, contact thedealer or your nearest Service Center.[MEMORY CARD PARAMETER ERROR]Use a card compatible with this unit. (P5,13)• You can only use an SDHC Memory Cardif using cards with 4 GB or more capacity.[MEMORY CARD ERRORPLEASE CHECK THE CARD]• An error has occurred accessing the card.Insert the card again.[READ ERRORPLEASE CHECK THE CARD]An error has occurred reading the data.Insert the card again. Make sure the card isinserted properly and then play back again.